To meet the daily water needs in a home, usually we need at least 1 water pump to distribute the water from the source to the entire point of water (water source can be either a well or a water reservoir at the bottom). To facilitate the consumption of water, usually we build a water tower with a certain height. In this condition we suck water from the water source to the pump under the water stored in the tower. Furthermore, the water tower, we utilize the force of gravity to make the water flow through the pipes without the need to help pump again.
In this condition the water pressure is usually sufficient for the needs washing dishes, washing clothes, or hold water in the tub. But when bathing using shower water pressure is usually less than satisfactory, especially if we use a gas water heater. Generally require gas water heater water pressure as one of the mechanisms lighters to light a fire to heat the water, so that when the water pressure is less, the lighter will not function properly. In addition, modern washing machines generally also require a certain water pressure to function properly. Therefore, it requires an additional pump to be able to meet this requirement.
One common solution is to use a shallow well pump has been fitted with an automatic. By using this solution, the water pressure is getting bigger, but shallow well pumps are typically used for this purpose often suffered damage to the automatic function. Automatic pumps generally use this type of pressure switch. At the time all valves closed then there is a back pressure on the pump automatic pressing at pressure to turn off the electrical current. When the faucet is open, the water pressure is reduced so that the pressure at the pump by the electrical current is reduced and linking back. In everyday use unscrew the faucet in the shower once could usually many times. Often the opening of the faucet is not full, thus making automatic on-off work several times. This is due to the water pressure is not channeled, thus making the pressure switch work harder and more quickly reduce the life of these spare parts.
Booster pump is an alternative to the use of automatic shallow well pump products which usually we know. Booster pump is a type of pump that serves only to increase the water pressure, so the pump can not be used to suck the water with the position of the water source below the pump. The use of this type of pump power savings due to the electric power required is usually smaller. In addition, this system does not use the automatic pump pressure switch, but using a kind of ball magnet that functions when there is water flow. The use of automatic type also has another advantage, because if there is no water, the pump will not work. So we avoid the risk of damage or burning of the pump when we forget to fill up the water reservoir.
Perkakasku.com offers two types of booster pump, the booster pump for household and industry (hotels, boarding, industrial, apartments, etc.). Booster pump for household, currently available from two well-known brands of pumps, Grundfos and the Wasser. Brand Wasser offers 2 options, namely PB and PB-60EA-169EA, while Grundfos also offers two options, namely UPA UPA 15-90 and 120, while the booster pump to the industry, while we only offer the Grundfos brand. Grundfos booster pumps for industrial use type of multi-stage pump that uses multiple-stainless steel impeller. The booster pump is still using an automated system with pressure switch, but with high quality.
So the booster pump which is suitable for you? When booster pumps are planned to be used in more than 7 points at the same water, we recommend you to use a booster pump for the industry. If it is below that, you can use a booster pump for household. Booster pump for household alone there are 2 types, both for brands and Grundfos Wasser, the small-type PB-60EA / UPA 15-90 or large PB-169EA / UPA 120 small type optimized for maximum use of 1 or 2 point of water, and is recommended to be placed closer to the water point. So if you use a booster pump to increase water pressure for the shower / water heater, it would be optimal if the booster pump is placed not far from the shower or water heater may be about 1-2 meters. Meanwhile, if you want the pump is placed close to the water reservoirs, or the amount of water is more than 2 points, it would be optimal when using a booster pump with larger type.
No comments:
Post a Comment