How to Overcome Water Damage Pump

When we die the water pump / no water flow on the flame machine / spinning, first step: check the water pipe in which there is not, if there is no water or there but not full, his visor fut Means broken / leaking or there might be at the pipe or pipe joints there are leaked.


But if the water in the pipe is full, Look at the end of the pipe to exit the water there are no air bubbles; If and air bubbles in the water in the pipe full of possibilities sill leak or it could be leaking impeller room / seeped or can be suction pipe is leaking or there is a connection .But if water leaked in full pipes and no air waves, likely broken impeller, close impeller, the impeller space, damage to the impeller, the impeller closed impeller space is usually worn with age or wear due to friction, which is caused by the incoming sand or dust. If the water pump is not rotating, the first step is check the electrical installation, the cable could be broken or the switch could be damaged, if the installation was no problem, try to check the bike from the back and turn the motor rotate. If we do not want to turn the rotary spinning or weight to rotate the impeller room filled with the possibility of dirt or if the water pump dies before the sound of the water pump his hard laker likelihood worn / jammed. If the bike rotated around a light but do not want to flame / spinning please check capacitors, good capacitors means that if the problem is with its bobbin,

There are three kinds of damage spool
1 ELECTRIC SHOCK
2 BROKE
3 BURNS
If the spool there is a short circuit, the motor rotation will be slow or still water flowing but soon will die and soon will be up again by itself, In this condition the motor hot. If its spool is switched off: when the water pump broke up the main bobbin still will not spin, but on the bike there was a buzzing sound tone. If the break up is not the main spool, if the water pump is turned on and assisted dipur water pump motor will turn on and drain the water but if turned off and then turned back the water pump will not turn on again, this kind of thing can also happen if the capacitor is dead / weak. if spool short circuiting the electricity will be directly dropped simultaneously when the water pump is turned on.
  There is again a very simple way to solve our water pump so durable. durable
1 Place the installation of the water pump should be clean of dust and avoid damp areas
2. When there are animals immediately clean though just what else ants rats, once I find there is no water pump because of the way because there are worms in its fans, and is very much due to the water pump on fire ant nest
3. not get wet
4.Do not exposed to the direct rays of the eye